Showing posts with label Winemaking. Show all posts
Showing posts with label Winemaking. Show all posts

Friday, September 11, 2020

Bottling Wine


Wine tamponade tool, manual pressed cork wine bottle cork packing machine,  playing the cork variety tamponade machine|machine machine|tool toolmachine  manual - AliExpress

Bottling is the final step in the winemaking process. Typically red wines are bottled in dark green bottles to prevent UV exposure which can accelerate the ageing process. If red wine is kept in a dark “cellar” environment, the light will not be an issue and any colour can be used.

White wines are typically put in clear bottles as they are not aged nearly as long as red wines.

Closures

A closure is a term for the type of seal used to seal bottles. Most wineries use a cork, synthetic cork, or screw cap. There has been a debate arguing for each type of closure. We’ll briefly touch on them here.

  • Natural Cork -  Is the closure of choice for many winemakers. The benefit of natural cork is its ability to let in a tiny amount of oxygen. The oxygen allows for “micro-oxygenation”, an essential part of long-term bottle ageing. Natural corks have a few drawbacks worth mentioning.  Poorly made corks can deteriorate and leave your wine “corked” (tasting like mouldy cork).  Even high-quality cork producers wind up making a few duds. Once a wine is corked there’s nothing you can do about it.  Another drawback of cork is that they could leak.  Some corks have a little channel on the side of the cork that allows the wine to leak out. The winemaker can’t always see these defects in cork before bottling so it’s a risk that they assume when using corks.

  • Synthetic Cork - Today’s synthetic corks are much improved over the old petroleum-based.  Synthetic corks don’t deteriorate, nor do they have a tendency to leak.  Many synthetic corks do not allow for micro-oxygenation.  This is fine for wine consumed young, but if the wine is aged for several years, natural cork is the best choice.

  • Screw Caps - Largely thought to be a sign of cheap wine.  But lately, they are also being used in more expensive wines.  Proponents of screw caps cite the lack of spoiled wine due to bad corks among their chief benefits.


On the other hand, screw caps don’t allow for micro-oxygenation as a natural cork will. Wine drinkers with a sensitive palate have been able to detect petroleum flavours in wines with this type of closure. As the inside of the cap is coated with plastic to help seal it the wine may in fact pick up undesirable flavours.

Summary

Natural corks are tried and true even if they result in a few bad bottles once in a while. For long-term bottle ageing, they are the best choice.

Ageing Wine


 What's that wine doing in a whiskey barrel? - Chicago Tribune

As red wine ages, the harsh tannins of its youth gradually give way to a softer mouthfeel. An inky dark colour will eventually fade to a light brick red. These changes occur due to the complex chemical reactions of the phenolic compounds of the wine. In processes that begin during fermentation and continue after bottling, these compounds bind together and aggregate. Eventually, these particles reach a certain size where they are too large to stay suspended in the solution and precipitate out. The presence of visible sediment in a bottle will usually indicate a mature wine. The resulting wine, with this loss of tannins and pigment, will have a paler colour and taste softer, less astringent. The sediment, while harmless, can have an unpleasant taste and is often separated from the wine by decanting.

During the ageing process, the perception of a wine's acidity may change even though the total measurable amount of acidity is more or less constant throughout a wine's life. This is due to the esterification of the acids, combining with alcohol in complex array to form esters. In addition to making a wine taste less acidic, these esters introduce a range of possible aromas. Eventually, the wine may age to a point where other components of the wine (such as tannins and fruit) are less noticeable themselves, which will then bring back a heightened perception of wine acidity. Other chemical processes that occur during ageing include the hydrolysis of flavour precursors that detach themselves from glucose molecules and introduce new flavour notes in the older wine and Aldehydes become oxidized. The interaction of certain phenolics develops what is known as tertiary aromas which are different from the primary aromas that are derived from the grape and during fermentation.

As a wine starts to mature, its bouquet will become more developed and multi-layered. While a taster may be able to pick out a few fruit notes in a young wine, more complex wine will have several distinct fruits, floral, earthy, mineral and oak-derived notes. The lingering finish of a wine will lengthen. Eventually, the wine will reach a point of maturity, when it is said to be at its "peak". This is the point when the wine has the maximum amount of complexity, most pleasing mouthfeel and softening of tannins and has not yet started to decay. When this point will occur is not yet predictable and can vary from bottle to bottle. If a wine is aged for too long, it will start to descend into decrepitude where the fruit tastes hollow and weak while the wine's acidity becomes dominant.

Grape Fermentation


Grape to Glass: Fermentation – Wine Sisterhood: Women who love wine, food,  travel, crafts, entertaining

Fermentation is the natural process that turns grape juice into wine, fermentation is actually a chain reaction of chemical responses. During this process, technically called the primary fermentation, the sugars in the grape juice are converted by the enzymes in yeasts into alcohol and carbon dioxide. In addition, fermentation generates minor amounts of numerous incidental by-products that affect the aroma and taste of wine including acetaldehyde, acetic acid (see acids), ethyl acetate, glycerol and alcohols other than ethanol. 

One of the potential problems winemakers must avoid is a stuck fermentation. This occurs when the yeast stops converting the sugar into alcohol and carbon dioxide, thereby prematurely leaving undesirable residual sugar in the wine. As more is learned about fermentation, techniques are evolving to manage the process in order to produce optimum wines. For example, managing the temperature during the fermentation-cooler temperatures (45 to 60°F) for white wines, warmer temperatures (70 to 85°F) for heavier red wines-leads to superior wines.

Red wines are usually fermented with their skins, seeds, and pulp to extract colour and tannins-something not desirable in white wines. yeast strains are also being experimented with to determine which ones work best for different wines under various conditions. Many winemakers believe barrel fermentation adds flavour and complexity to some white wines. carbonic maceration is a specialized fermentation process for producing light fruity red wines.


Harvesting and Crushing Grapes


Grape harvest - Whistler's Knoll

Sample clusters of wine grapes are inspected with a refractometer to determine if the grapes are ready to be picked. The refractometer is a small, hand-held device (the size of a miniature telescope) that accurately checks the amount of sugar in the grapes.

If the grapes are ready for picking, a mechanical harvester gathers and funnels the grapes into a field hopper, or mobile storage container. Some mechanical harvesters have grape crushers mounted on the machinery, allowing vineyard workers to gather grapes and crush them at the same time. The result is that vineyards can deliver newly crushed grapes, called must, eliminating the need for crushing at the winery. This also prevents oxidization of the juice through tears or splits in the grapes' skins.

Mechanical harvesters, or, in some cases, robots, are now used in most medium to large vineyards, thereby eliminating the need for hand-picking. First used in California vineyards in 1968, mechanical harvesters have significantly decreased the time it takes to gather grapes. The harvesters have also allowed grapes to be gathered at night when they are cool, fresh, and ripe.

The field hoppers are transported to the winery where they are unloaded into a crusher-stemmer machine. Some crusher-stemmer machines are hydraulic while others are driven by air pressure.

The grapes are crushed and the stems are removed, leaving liquid must that flows either into a stainless steel fermentation tank or a wooden vat (for fine wines).

Wine Production Process





Making wine remained much the same throughout the ages, but new sophisticated machinery and technology have helped streamline and increase the output of wine. Whether such advances have enhanced the quality of the wine is, however, a subject of debate. These advances include a variety of mechanical harvesters, grape crushers, temperature-controlled tanks, and centrifuges.

The procedures involved in making wine are often times dictated by the grape and the amount and type of wine being produced. Recipes for certain types of wine require the winemaker (the vintner) to monitor and regulate the amount of yeast, the fermentation process, and other steps of the process. While the manufacturing process is highly automated in medium- to large-sized wineries, small wineries still use hand-operated presses and store wine in musty wine cellars.

A universal factor in the production of fine wine is timing. This includes picking grapes at the right time, removing the must at the right time, monitoring and regulating fermentation, and storing the wine long enough.
The wine-making process can be divided into four distinct steps: 

  • Harvesting and crushing grapes
  • Fermenting must
  • Ageing 
  • Bottling